Lee Precision Ultimate Rifle 4-Die Set .243 Winchester

The Lee Precision Ultimate .243 Winchester Rifle 4-Die Set is perfect for the beginning or experienced reloader. The set is made of steel and includes a Full Length Sizing Die which produces ammunition to factory-new specifications, using cases fired in other guns.

The Collet Neck Sizing Die will preserve the perfect fit of your fire-formed cases, by sizing only the neck. The Bullet Seating & Feed Die works with almost any point style bullet and a simple finger adjustment is all that is needed to adjust the seating depth. The Factory Crimp Die will crimp the bullet in place more firmly than any other tool.

Includes:

• Full Length Sizing Die, (Needs lubrication)
• Collet Neck Sizing Die
• Bullet Seating & Feed Die
• Factory Crimp Die
• Universal Shell Holder
• Powder Dipper
• Instructions
• Load Data
• Storage Box

Features:

• Made of Steel
• Produces ammunition fired in other guns, to factory-new specifications with the Full Length Sizer
• Preserve fire-formed cases with the Collet Neck Sizing Die
• Crimps bullet firmly in place with the Factory Crimp Die

Notes:

• For further Load Data try HODGDON Powder Co.

IT IS YOUR RESPONSIBILITY TO ENSURE THE SAFETY OF YOUR LOADS

FACTORS THAT WILL INCREASE PRESSURES. SOME WILL BE DANGEROUS:

• DO NOT USE more powder than recommended
• DO NOT USE a heavier bullet than recommended
• DO NOT SEAT the bullet deeper than normal
• DO NOT USE magnum primers unless using a slow burning ball powder
• Greatly oversize bullets, excessively hard bullets ro cases that are too long will cause higher pressures
• High temperatures or cartridges that were stored in a hot car or trunk will produce higher pressures

WARNING:

Ammunition reloading can be dangerous if done improperly, and should not be attempted by persons not willing and able to read and follow the instructions included with each product exactly.

• Always wear safety glasses when reloading and shooting.
• Ammunition loaded with these tools should be used in modern guns, in good condition.
• Children should not be permitted to reload ammunition without strict parental supervision.
• Primers and gun powders, like gasoline and matches, can be dangerous if improperly handled or misused.
• We do not accept responsibility for ammunition loaded with these tools, as we have no control over the manufacture and storage of components or the loading procedure and techniques used.